Art Projector Frequently Asked Questions
General Projector Frequently Asked Questions
Could I use my projector in a lighted room?
Yes and no. For the clearest and brightest picture the projector should be used in a completely dark room. A reasonably clear picture can still be achieved in dim light, but virtually no picture can be seen in a fully lit room. Note: Projecting photos requires a totally darkened room.
Why does the projected image shift during the tracing process?
Shifting occurs because the photo or paper being enlarged is exposed to heat from the lamp, causing it to expand. Thus, the projected image appears to shift.
What can I do to prevent this shifting?
To minimize shifting, after setting your projector up at the desired range, let the projector run for several minutes before beginning tracing.
LED 300™ DIGITAL ART PROJECTOR™:
How do I get the LED 300 to mirror my MAC's computer screen?
To get your LED 300 to mirror the image you see on your MAC computer's screen you must follow these 5 steps: (1) Go into "System Preferences." (2) Click "Display." (3) Click "Detect Display" (projector must be plugged in). (4) Click "Arrangment." (5) Then click "Mirror Display." -- This should create a mirror image of the picture on your computer monitor directly on to your projection area.
FOR MORE LED300 FAQ'S -- REFER TO THE "LED PRODUCTS" FAQ SECTION...
Prism™ / Super Prism®:
How do I do reduction with my Super Prism®?
To achieve reduction with the Super Prism®, the accessory lens #200-705 should be used. This lens reduces down to 80%. The Super Prism® includes this lens.
What is the difference between the Prism™ and Super Prism®?
The main difference between the Prism™ and Super Prism® is in the lens. The Prism™ has a single-element lens with the projection range of 80% reduction up to 20 times enlargement, while the Super Prism® has a three-element color corrective lens with the projection range of 3 times to 20 times enlargement.
The Super Prism® lens produces a very sharp and bright image. It is ideal for projecting photos or highly detailed designs. (The Super Prism® includes an accessory lens that will expand the range to 80% reduction). Both projectors have a copy size of 7 X 7 inch and 500-Watts of illumination.
Why can't I use the Super lens with the Prism™ stand?
Because of the limited height of the Prism™ stand you are not able to back up far enough from the tabletop to achieve any amount of projection. The Super Prism® lens requires a minimum of 32 inches to focus (this measurement is the distance from the wall or other projection surface to the edge of the lens).
How far back do I have to be to get the maximum of 20 times enlargement?
To achieve 20 times enlargement with the Prism the projector should be placed 14 feet from the projection surface. To achieve 20 times enlargement with the Super Prism® the projector should be placed 16.5 feet from the projection surface. An approximate rule of thumb is every 9.5 inches away from the projection surface equals a 1-time enlargement.
Is there a lens that does more than 3 times enlargement with the Prism™ stand?
No, but the range of enlargement can be increased by simply swiveling the upper assembly of the stand over the floor or lower surface. The Prism™ Stand is capable of 7 times enlargement onto the floor (from a 36 inch table). When doing floor projection, please make sure the table is sturdy enough to hold the projector in this position.
Why am I unable to get 2 times enlargement with the Prism™ lens?
Because of the stationary positioning of the glass lens within the lens barrel, combined with the convex shape of the lens, a "gap" is created when reversing the lens for either enlargement or reduction. The size of the "gap" is 1.65 to 2.24 times enlargement. Therefore, 2 times enlargement is not possible because it falls within this gap.
Where does the original copy go?
The art is placed underneath the projector. The projector has a 5 X 5 inch opening that sits on top of the art.
Is there a stand for the Tracer®?
Yes, the Projector Mobile Floor Stand can be used for wall projection with the Tracer®. Simply set the projector in the provided stand platform. The Projector Mobile Floor Stand rotates 360-degrees, tilts 15-degrees front to back, and adjusts from 4 feet to 4 ½ feet high, allowing for more versatility in the capabilities of the projector.
Designer™ / DesignMaster®
What is the difference between the Designer™ and the DesignMaster®?
The only difference between these two projectors is the stand. The DesignMaster®has a heavy duty stand that is spring loaded to assist vertical movement, while the Designer™ has no stand. Both projectors have the same capabilities when projecting vertically.
Do both projectors also do horizontal projection?
Yes, both projectors are capable of horizontal projection. Simply remove the projector from the stand and place it on a tabletop perpendicular to the wall.
- If so, what is the projection range?
- Horizontal projection range:
Designer 70% reduction up to 30 times enlargement.
DesignMaster 70% reduction up to 30 times enlargement
What are the major differences between the Prism™ series and the DesignMaster® series?
(See comparison chart below)The differences between the Prism™ series and the DesignMaster® series can be outlined by the differences in their copy area, lighting, and both vertical and horizontal projection ranges, as follows:
- One other major difference between these two series of projectors is that the DesignMaster® comes standard equipped with a table stand for vertical projection. The Prism™ series does not. However, a Prism™ Table Stand may be purchased as an accessory.
- The Prism™ series is top loading and the copy area is glass covered, allowing for easier positioning of the original copy. The top glass also allows flush mounting for art and oversized artwork (the lid can be removed) and provides a platform for 3-D objects.
- The Designer Series has internal metal clips to stabalize the artwork and allows for larger 3-D objects to be projected.
- All (4) of the projectors are thermally protected.
|Model||Copy Area||Lighting||Vertical Projection||Horizontal Projection|
|Prism™||7" x 7"||500-Watts||80% - 3X||80% - 20X|
|Super Prism®||7" x 7"||500-Watts||80% - 3X*||80% - 20X *|
|DesignMaster®||6" x 6"||250-Watts||70% - 4X||70% - 30X|
|Designer™||6" x 6"||250-Watts||70% - 4X||70% - 30X|
|* Reduction from 3x and less accomplished with accessory lens.|