Tag Archives: 1520

1520 Filter Pak (4 ea. mid-filter & poly-carb pads)

4 each mid-filter & poly-carb filter pads. The mid-filter is a non-woven air-laid polyester substrate with a green PVC binder on the exit side. Poly-carb filter is a carbon-impregnated polyester offering high odor and further particle-trapping efficiency. Note: Both filters should be replaced at the same time, approximately every three months with regular use or when replacing the Pre-Filter Roll.

1520 Pre-Filter Roll (20″ x 50 yards)

accessory_pre-filter-roll-trayUnique roll mounted 100% polyester pre-filter that traps the bulk of the initial spray and provides a continuous clean work surface. To replace, simply pull down the soiled pre-filter and cut off with a pair of scissors. 20″ x 50 yards, 100% spun bonded continuous filament polyester. Provides approximately 90 surface sprays.

1520 Standard Model

SprayBooth 1520PDF Info Product ManualsAn efficient booth for small spaces and tight budgets, the 1520 accommodates flat or 3-D objects. The 15 x 20 inch (381 x 508 mm) work surface features a three-stage filter system: a replaceable pre-filter sheet, which captures the bulk of the sprayed materials, thick polyester mid-filter and polyester/carbon filter. Features a built-in exhaust adapter for venting out-of-doors or to another space.

Used By:

  • Crafters
  • Hobbyists
  • Model Builders/Designers
  • Commercial Artists

Product Highlights

  • Features a 15 x 20 in (381 x 508 mm) work surface accommodates flat or 3-D objects up to 13 x 18 in (330.2 x 457.2 mm)
  • Replaceable three-stage filter design
  • Replaceable spray guard hood
  • Combines low cost with high efficiency
  • Airflow: 185 CFM
  • Weight: 17 lbs (8 kg)
  • Width: 20 in (508 mm)
  • Depth: 15 in (381 mm)
  • Height: 18 in (457.2 mm)
  • Electrical: 115 V, 15-Watts
  • 1-YEAR WARRANTY
  • Made in the U.S.A.

Features Three-Stage Filter Design:

  • 1st Stage: 100% polyester pre-filter media that traps the bulk of the initial spray and provides a continuous clean work surface. Spray Booth includes 5 pre-cut sheets. Replacement Pre-Filters available in a pre-cut 20 sheet pack or unique cost-saving 50-yard roll.
  • 2nd Stage: Under the pre-filter is a 1 inch thick non-woven polyester air-laid material with a blue PVC binder on the exit side. This material, unlike fiberglass, is non-toxic, will not migrate on the air exit side and offers excellent filtration. Spray Booth includes 1 each of this filter.
  • 3rd Stage: A carbon-impregnated polyester (poly-carb) offering odor and further particle-trapping efficiency. Spray Booth includes 1 each of this filter.

Available Accessories & Replacement Filters:

Pre-Filter Roll (20 inch x 50 yards)
#225-356

Filter Pak (4 ea. mid-filter & poly-carb pads)
#225-317

Pre-Filter (20 sheet pack)
#225-316

Replacement Spray Guard Hood
#200-572