Category Archives: LED 1000™ HD Digital Art Projector™

LED 1000™ HD Digital Art Projector™

LED 1000™ QuickStart – Step 5

Custom Features and Settings

1. Grid Templates/Patterns

  • The LED 1000™ has 20 grid templates/patterns built into the device to simplify the process of composition, alignment, and scaling
  • Select “Grid” on the remote; press left or right arrows to select desired grid and grid color
  • based on the projected surface
  • The grids may be projected alone as a template to aid in alignment and as a guide when painting, drawing or lettering. The grids can also be superimposed over an image to aid in alignment and composing. Load image from digital source. Push the “Grid” button on remote to select or change grids and color.

2.  Keystone Control – The LED 1000 offers both manual and auto keystone adjustment.

The keystone effect is created when the projector or the projection surface are not at right angles to each other. The image becomes slanted or distorted either vertically or horizontally.

The LED 1000 features manual keystone buttons on the remote to adjust vertical keystone (Key.S p / Key.S p). Horizontal adjustment is adjusted by turning the projector left or right until the image is square.

When set to Auto Keystone adjustment (Settings – options), the vertical adjustment is corrected automatically if the projector is tilted vertically (not the projection surface)

3. Grayscale – Color images can be adjusted to grayscale to aid in tracing and/or to evaluate tonal values

  • In “USB” mode, select “Q.Menu” g “Set Video” g using the arrow keys on the remote,
  • scroll down to “Color”; adjust the color down to zero
  • All other devices – select “Settings” g “Options” using the arrow keys on the remote, scroll down to “Grayscale” and turn “on” or “off”


4. Rotating/Flipping Images – The LED 1000™ allows you to rotate and flip images to suit your artistic requirements

  • Rotating Images – USB Mode only – when previewing an image, push “OK” to reveal menu bar at bottom of image. Use g arrow key to select Circle arrow . Push the “OK” button to rotate image.
  • Flipping/reversing images – (If using USB, push “Exit”). Push “Settings”, select “Option” arrow to and select “PJT Mode”. If only two choices are available, reverse out of PJT mode and go to “Auto Keystone” and turn to “Off”. Return to PJT mode to reveal 4 choices.

5. Digitally Enlarging Photos – (USB mode only); images can be enlarged up to 200%
using a menu selection.

  • With an USB image projected, press “OK” button to reveal menu bar at bottom of image.  Arrow down to bar and select magnifying glass symbol, push “OK” and arrow to + sign and  push “OK” to enlarge image. Depending on image size the viewing window may be moved around the image using the arrow keys.

6. Picture Wizard II – Adjusts the settings of each input to desired picture quality and standards (Exit USB mode). Select “Settings” on the remote; scroll down to “Picture Wizard II” and follow  the on-screen instructions

7. Settings – The LED 1000 offers a full array of settings to adjust image appearance. Go to  “Settings” on the remote and review all the options and experiment with all the adjustments. Remember all adjustments can be reversed and the projector can be returned to factory  defaults at any time. Go to “Settings” “Picture” and arrow down to “Picture Reset” to return to picture factory settings. For a complete reset to original factory settings go to “Options” and select “Initial Setting” and “Yes”.

Return to:
LED 1000™ HD Digital Art Projector™…

LED 1000™ QuickStart – Step 4

Install Input Source

The LED 1000™ accepts input from a variety of digital sources including PC/Mac computers, smart phones, tablets, pads, HDMI devices and USB flash drives/card readers:

LED1000 - Inputs

1. USB Drive
Using the USB port is an easy and popular source of digital images. Transfer digital images from computer (JPEG) onto a USB flash drive or use the Included Card Reader if images are installed  onto a SD card (from camera). Plug either USB devices into either USB port on the back of projector.

  • Press “Input” button on remote.
  • Toggle (using arrows on remote) to USB Flash Memory selection (far left), push “OK” on remote.
  • Select from list or toggle to folder. Select item.

2. SD Card Reader (same as USB)
Insert SD memory card into multi-card reader; insert multi-card reader into USB port.

3. HDMI Devices (2 ports available)
Using included HDMI cable, the LED 1000™ can be connected to a PC, MAC, smart phone,  tablet/pad, HD receiver, DVD player, VCR or other external devices. If the device does not have a  HDMI port, an appropriate adapter may be purchased at an electronic supplier or use AV or Component connection.

  • If device is not immediately recognized, Press “Input” button on remote.
  • Toggle to HDMI1 or HDMI2 selection, push “OK” on remote.

4. Composite/Component Devices

5. Refer to manual for attaching Optical Audio and LAN devices.


LED 1000™ QuickStart Step Five…

LED 1000™ QuickStart – Step 3

Using Your LED 1000™

LED1000-on-tripod1. Mount LED 1000™ onto a tripod or a sturdy, hard platform near a power outlet (DO
NOT block vents on projector).

2. Connect power supply cord into the back of projector (AC in) and into nearby outlet.

3. Point LED 1000™ toward desired surface.

4. Press red power button on remote or lighted power button on top of projector.

5. Focus – Rotate lens focus ring.

6. Follow initial setup – Select language and internet settings (if available).

7. Attach digital source – See Step Four for further information.

8. Adjust image size by moving projector nearer or farther from projection surface and refocusing.


LED 1000™ QuickStart Step Four…

LED 1000™ QuickStart – Step 1

Review Package Contents:

Included accessories

1. LED 1000™ (PF80A) HD Digital Art Projector™

2. Remote control with two AAA batteries

3. Power cord 4. HDMI cable

5. Composite cable

6. Component cable

7. Multi-card USB card reader

8. Storage bag

9. Owner’s Manual (English)

10.  CD Manual (Please note that the CD manual  page numbers may vary from included printed manual)

LED 1000™ QuickStart Step Two…